Three-Dimension Drilling Machine Type SKHMZ3

Detailed Product Description

I. Brief Introduction of the Machine

The structure of the machine is rollers' conveying and gantry moving in a small range. The gantry structure and base are plate style box-beam structure.

It's mainly used for drilling of three-dimension multi-hole of H-beam. Three axes simultaneous machining may be realized. The accurate CNC system and fine mechanical performances may meet the accuracy requirements for the dimensions of one group of holes accurately.

 

II. Main Technical Parameters

The max. machining capability of the drilling machine:

  Drilling diameter: 13 -40mm
  Gantry moving range: 2000mm
  The range for the height of H-steel: 2 00 -800mm
  The range for the width of H-steel: 200 -1200mm
  The range for the max. length of H-steel: 5000 -15000mm
  Motor power of spindle: 3×4KW
  Taper of drill rod Morse 4
  The max. up-and-down speed of cross drill: 500mm /min
  Hydraulic feeding: Pressure in hydraulic system: 10Mpa
  Cooling mode: Atomized cooling
  Total input power: 26 KW
  Weight of the complete machine: 8000kg

 

III. Characteristics of the Machine

The machine uses the computer and accurate and reliable driving mechanism and replaced the primitive method of re-aligning and clamping for second time positioning after drilling in single direction. The positioning accuracy of machining of holes on mutual vertical plane is improved and the working efficiency is greatly increased at the same time.

 

IV. Structure and Composition

The machine is adopted with steel box-beam structure. The gantry is stable in structure and high in strength. The spindle box is controlled by computer and the spindle motor is adopted with four governing modes.

The workpiece is clamped hydraulically.

General lay-out will be according to the length of H-beam to be machined by users, and concretely design the lay-out of the relative clamping and aligning device and conveying rollers and set the relative dimensions.

 

V. Detailed Technical Data and Parameters

Ser. No.	Items	Permissible Tolerance	Measures
1	Perpendicularity of axis X and axis Y	±0.08/ 300mm	Angle gauge with high accuracy and dial gauge
2	Perpendicularity of axis X and axis Z	±0.08/ 300mm	Angle gauge with high accuracy and dial gauge
3	Perpendicularity of the spindle of cross drill and the spindle of vertical rill	±0.08/ 300mm	Angle gauge with high accuracy and dial gauge
4	The flatness of the spindle of cross drill and the spindle of vertical drill	± 0.15mm / 300mm	Angle gauge with high accuracy and dial gauge
5	Positioning accuracy of spindle	± 0.10mm / 300mm	Dial gauge, gauge block and micrometer
6	Repeat positioning accuracy of spindle	0.2mm / 300mm	Dial gauge, gauge block and micrometer
7	The max. moving speed of gantry	1500mm /min	Stopwatch and meter scale
8	The max. moving speed of vertical drill	500mm /min	Stopwatch and meter scale
9	The max. moving speed of cross drill	500mm /min	Stopwatch and meter scale
10	Rotary speed of spindle	180-560r/min	Speedometer
11	Spindle feeding stroke	400mm	Meter scale

 

VI. CNC System

1. Industrial control computer made in Taiwan is used as main processor.

  RACK-360 case of industrial control computer
  PCI-14S3 bottom board
  Taiwan 586main board
  Main processor: Intel Pentium 233MHz
 Internal memory: 64M
  MAXTOR 40G hard disk
  1.44M floppy drive
  15 inches of CRT high resolution color monitor
  Menu