CNC Ingenious Cutting Machine Type SKG-JA

Detailed Product Description

I. Main Technical Specifications of the Machine

Longitudinal track length is 2400mm , the effective cutting length is 1600mm .
  Horizontal track width is 1200mm , the effective cutting width is 1000mm .
  Main cutting device: 1 set, with a set of single torch and a set of automatic ignition device
  Cutting thickness is 1∼120mm .
  Cutting speed is 50∼1000mm /min.
  Idle traveling speed: 50∼3000mm /min
  Cutting roughness is 12.5μm
  Cutting accuracy is ± 0.5mm /M

II. Mechanical System

  Cross beam: Single rotary structure with high strength and rigid design, and stress has been removed. The compositive compound tracks of steel mounted tracks and straight line tracks are adopted, its manufacturing accuracy is much higher than the one of steel mounted tracks, and the liable deformation of the traditional steel mounted tracks after being impacted will be overcome by using this kind of compound tracks. Racks with high accuracy are mounted, and the hardness of the teeth surfaces is produced according to the accuracy of 8-degree of GB10095-88 standard.

  Main sliding seat: Box type welding structure, stroke spacing switch is available in the machine.

  Main gearbox: Complete sealed and without clearance, the automatic spring clearance eliminating and wearing compensation clutch structure is available. It is high in driving accuracy, good in reliability and long in service life.

  Tracks and racks in X direction: Racks with high accuracy that meet the requirement of DIN8523 Standard.

4.1. Tracks: Mechanical safety blocks are on both of the two ends.

arack: < 0.02mm

bThe tolerance of the two sides of the track: < 0.02mm

cThe perpendicularity of the two sides and top surface of the track: < 0.02mm

5Main cutting device: 1 set, with horizontal driving deceleration box and rolling track up-and-down mechanism.

6The cross cables are adopted with chain structure which is clean and tidy.

7Adjustable stands for supporting the tracks.

8Other standard and non-standard parts.

III. Control System

Intel Pentium series industrial control computer

  9 inches of monitor
  64M electronic disk
  8M internal memory
  3.5 inches of floppy drive

Functions of Control Software:

  Automatic cutting of the whole procedure
  Pause, acceleration and deceleration function, return and re-return function
  Rapid positioning
  CRT simultaneous machining display, synchronous tracking display during the procedure of machining, display of coordinate position and display of current speed
  Changing of coordinate position
  Acceleration and deceleration function at the turning point
  Standard parts storage
  Plasma interface
  Edition language: ESA or GCD language

IV. Driving System

 Driving cabinet asse mbly
 Special master line board
 Input and output photoelectric isolation board
 Function board of cutting device
 Step-by-step motor drive unit: It can realize 5 or 10 fine steps of step-by-step motor, so high reliability is guaranteed.
 Motor: Micro step-by-step motor made in China-America joint venture enterprise

V. Gas Line System

  Gas line case
  Hose
  Electromagnetic valves
  Flashback arrester
  Torches and tips