CNC Pipe Profile Cutting Machine Type SKGG-B

Detailed Product Description

Functions:

1. It can cut several holes of column with different directions and different diameters and meet the perpendicular intersection of eccentric and non-eccentric between main pipe axis and branch pipe axis.
2. It can cut the end of column on the end of branch pipe and meet the perpendicular intersection and inclined intersection of eccentric and non-eccentric between main pipe axis and branch pipe axis.
3. It can cut bevel end face on the end of round pipe.
4. It can cut welded elbow and both ends of shrimp joint.
5. It can cut the end of branch pipe intersected with circular main pipe.
6. It can cut bevel of variable angle.
7. It can cut square hole and waisted hole.
8. It can cut off steel pipes.

Main Technical Specifications

1. Outer diameter of pipe to be cut: φ 60600mm
2. Cutting thickness of carbon steel: 525mm
3. Bore diameter for steel pipe going through spindle: φ 200
4. Steel pipe cutting length: 12000mm
5. Numbers of control axis: 6 (or 5)
6. Max. travel: 10000mm in X direction
600mm in Y direction
400mm in Z direction
7. Cutting speed: 10 ~ 2000mm /min.
8. Angle of grove: ≤ 60 °
9. Max. rotary angle:
ω W: Limitless rotation (pipe rotating)
ω B: ± 70 ° (torch swayed angle)
ω A: Limitless rotation (the torch rounding axis Z)

Basic Device of the Machine

  Main flame cutting device: 1 set (equipped with a set of limitless rotary torch)
  High-speed pre-heating gas line system: 1 set
  Sliding seat: 1 set (A set of driving device in X direction is included.)
  Track and driving device in Z direction: 1 set
  Track and driving device in Y direction: 1 set
  Control Cabinet: 1 set
  Control Panel: 1 set
  Bracket for steel pipe: 3 sets
  6 axes driving, 5 of them are driven by imported full digital AC servo motor and 1 of them is driven by fine step-by-step motor.
  Auto ignition system: 1 set
  Cutting gas: Oxygen-acetylene

Control System

Hardware
AmB-655HT-B4 integrative workstation made in Taiwan is adopted.

Main devices

Intel Pentium 233MHz , multi-medium touch-screen , 15 inches of high resolving power color liquid crystal monitor, VZA high speed graph processing card, 64M inner memory, 8M electronic disk, one set of 3 inches of floppy drive, one set of 40G hard disk.

Characteristics:

  15 inches of XGATFTLCD monitor (liquid crystal)
  Aluminum alloy panel and stainless steel case
  According with NEMA4/12 & IP65 water proof panel
  2 thin film keyboards, 59 data keys and 24 function keys
  Frame for installation of CD drive, floppy drive and hard disk is available.
  Base board for 10-slot ISA/PCI master line
  The switch of power supply, LCD brightness control device and back of the light control device are at the back of the function keys of the front panel.

Specifications:

  Case: Strong stainless steel case, according with NEMA4/12 aluminum alloy panel
  Monitor: 15 inches of XGA (1024 × 768) TETLCD (liquid crystal)
  Disk frame: CD-ROM,3.5 inches HDD and 3.5 inches FDD
  Color of panel: PAL-7035
  Power supply: Standard 250W power supply
  Dimension (W × H × D): 483 × 354 × 255mm ( 19 × 19.3 × 10 )
  Net weight: 21kg ( 46.3lbs )

Video Card

(MBC-268B LVDS)

  Type: Short card PCI-master line
  Chips T65555
  Inner memory: 2MB (installed inside)
  LCD interface: Support 36-bit tcd interface
  Max. resolving power: 1024 × 768

Environment

  Working temperature: 0 50
  Storage temperature : -20 60
  Storage humidity: 595%
  Anti-shake coefficient: 5 17Hz, 0.1 double-angle shake 17 ~ 500 Hz, 1.5G up-and-down shake
  Anti-shock coefficient: 10G of acceleration shock (11 mesc, continuous time)
  EMI: Passing FCC/CE Class A

Touch-screen

Characteristics of Micro Touch Capacitive Touch Screen:

  1024 × 1024 high analysis
  Scratch-resistant, super-long service life
  Min. touch time: 3ms
  19.2 Kbaud change-over speed, Max. 270 touch point/sec.
  High accuracy, error rate is less than 1%.
  The complete software: Support MS-DOS, Windows OS/2Windows95/NT .

Software Functions of Control System:

  Parametric optional programming of single-shape cutting
  Parametric group programming of multi-shape cutting
  Cutting control of set angle and welding groove
  Pause, acceleration and deceleration
  Return and re-return along the original track
  Auto ignition, rapid preheating and automatic piercing
  Memory of point break and power-off
  Rapid positioning
  CRT simulated machining and synchronous track display during the procedure of cutting
  Auto measurement of graphs, enlargement of windows, edition and adjustment of the positions of graphs
  Abundant and expanded macro-programme call and edition
  Auto alarm and self-diagnosis
  Man-machine interchange

Drive System

1. Driving cabinet assembly
2. Special master line board
3. Servo motor driving interface board
4. solid relay board
5. Function board
6. Imported AC servo motors possess three monitoring ways for rotative velocity, torque and position deviation, auto trouble indication, alarm and synchronous protection.

Gas Line System

1. It may realize rapid pre-heating, stepless piercing.
2. Two-way electromagnetic valves made in Germany are adopted.